The ID10 acquisition module transmitt process measurements via RS485 serial links with MODBUS RTU (JBUS) protocol to either a computer based data acquisition system or to the OMS monitoring and recording device. The ID10 accepts up to 4 analog signals such as 0/4.20 mA or 0/2.10 V from temperature, pressure, humidity etc trasmitters. The ID10, further than transmitting the measure of every channel via RS485, it's also able to manage directly the signals of high and low alarm for each channel. Each serial connection is capable of handling a maximum of 15 ID10 modules for a total of 60 measurements of various quantities. Each module includes 4 digital inputs for free voltage contacts and one relay output. The digital inputs can be used to transmit, to the supervision system, information about local devices of the plant as for instance status of protection devices, open doors, lights, etc.. The relay output can be used for a local high or low alarm, via serial line or programmino the ID10 itself, or can be controlled based on the status of a digital input.
Prijzen zijn per stuk, exclusief 21% BTW en gelden voor levering af magazijn Voorthuizen. Bij levering in Nederland of in België worden verzendkosten altijd in rekening gebracht tot maximaal EUR 25,00. Ditzelfde geldt voor expreskosten en/of rembourskosten. Bij de producten trainingen en cursussen is na het bevestigen van de cursusdatum, bij het niet verschijnen van de deelnemer(s), de verplichting ontstaan tot volledige betaling. Het volgen op een latere datum ingeval van niet verschijnen is in overleg mogelijk, maar wordt uitsluitend gezien als service. Hieruit kan geen enkel recht uit worden onttrokken.